Sealey TP51 Drill Powered Water Pump

Ferguson 11/05/2016 10:35:30

Actually bought this to pump oil into my land rover diffs and gear box. Have done 3 oil changes so far and working a treat

Dennis 18/08/2014 18:41:12

As mentioned in a previous review, the drive shaft is a weak point. The pump is quite stiff to turn and the shaft is not big enough to be held in a normal drill. A hexagon shaft would be better. The instructions said to turn it anticlockwise. This did not work for me, the arrows on the body indicate the flow is the wrong way. Eventually got it working, clockwise and flowing in the marked direction but then the shaft was worn and now runs with a lot of vibration. I will need to modify the drive shaft before it is usable again.

John 12/02/2014 18:52:41

Looks good. Will be used for aquarium water transfer. Should be just the job. Thank you.

Hans 31/07/2013 19:53:58

I think it is a good product for the price, however the round shaft makes the connection with a power drill difficult as it tends to slip in the drill chuck, a 6 sided end on the axle would be a major improvement.

Arthuriow 12/05/2013 10:41:26

Works well but very big warning, if you do not notice pump is running dry it will burn out very quick as i found out. Burnt out two of them.

John 28/03/2013 11:12:44

The pump was adequate for the use i had for it. to drain a pond of the last 3 inches of water left. it took a while to do as i stopped the drill every so often, not to over heat the drill. For small jobs it is value for money.